Thrust Bearing Size Chart in mm

Updated on: 22nd May,2026

Looking for a Bearing Manufacturer?

BKZ Industry offers reliable solutions for all your bearing needs.

Thrust bearings are designed to carry axial loads. There are many types of thrust bearings, including single direction thrust ball bearings, double direction thrust ball bearings, single direction thrust ball bearings with spherical housing washers, double direction thrust ball bearings with spherical housing washers, angular contact thrust ball bearings, spherical roller thrust bearings, cylindrical roller thrust bearings, tapered roller thrust bearings, and needle roller thrust bearings.

Different thrust bearing types are used for different load directions, speeds, installation structures, and working conditions. Each type also has many sizes for different applications.

So in this article, I will list the complete thrust bearing size charts for your reference.

If you need to buy thrust bearings, you can contact BKZ Industry. We offer most thrust bearing types and sizes you need, supported by 2 factories and more than 400 employees.

Now, let’s check the thrust bearing size charts.

Tip: To quickly locate the thrust bearing size you need, press Ctrl + F on Windows or Command + F on Mac, then enter the bearing number or size you want to check.

Single Direction Thrust Ball Bearing Size Chart

Bearing Model	Bore Diameter d (mm)	Outside Diameter D (mm)	Bearing Height T (mm)	Basic Dynamic Axial Load Rating Ca (kN)	Basic Static Axial Load Rating C0a (kN)	Minimum Load Factor A	Limiting Speed with Grease Lubrication (r/min)	Limiting Speed with Oil Lubrication (r/min)	Approximate Mass W (kg)
51100	10	24	9	10.0	14.0	0.001	6300	9000	0.019
51200	10	26	11	12.5	17.0	0.002	6000	8000	0.028
51101	12	26	9	10.2	15.2	0.001	6000	8500	0.021
51201	12	28	11	13.2	19.0	0.002	5300	7500	0.031
51102	15	28	9	10.5	16.8	0.002	5600	8000	0.022
51202	15	32	12	16.5	24.8	0.003	4800	6700	0.041
51103	17	30	9	10.8	18.2	0.002	5300	7500	0.024
51203	17	35	12	17.0	27.2	0.004	4500	6300	0.048
51104	20	35	10	14.2	24.5	0.004	4800	6700	0.036
51204	20	40	14	22.2	37.5	0.007	3800	5300	0.075
51304	20	47	18	35.0	55.8	0.016	3600	4500	0.150
51105	25	42	11	15.2	30.2	0.005	4300	6000	0.055
51205	25	47	15	27.8	50.5	0.013	3400	4800	0.110
51305	25	52	18	35.5	61.5	0.021	3000	4300	0.170
51405	25	60	24	55.5	89.2	0.044	2200	3400	0.310
51106	30	47	11	16.0	34.2	0.007	4000	5600	0.062
51206	30	52	16	28.0	54.2	0.016	3200	4500	0.130
51306	30	60	21	42.8	78.5	0.033	2400	3600	0.260
51406	30	70	28	72.5	125.0	0.082	1900	3000	0.510
51107	35	52	12	18.2	41.5	0.010	3800	5300	0.077
51207	35	62	18	39.2	78.2	0.033	2800	4000	0.210
51307	35	68	24	55.2	105.0	0.059	2000	3200	0.370
51407	35	80	32	86.8	155.0	0.130	1700	2600	0.760
51108	40	60	13	26.8	62.8	0.021	3400	4800	0.110
51208	40	68	19	47.0	98.2	0.050	2400	3600	0.260
51308	40	78	26	69.2	135.0	0.096	1900	3000	0.530
51408	40	90	36	112.0	205.0	0.220	1500	2200	1.060
51109	45	65	14	27.0	66.0	0.024	3200	4500	0.140
51209	45	73	20	47.8	105.0	0.059	2200	3400	0.300
51309	45	85	28	75.8	150.0	0.130	1700	2600	0.660
51409	45	100	39	140	262	0.36	1400	2000	1.41
51110	50	70	14	27.2	69.2	0.027	3000	4300	0.15
51210	50	78	22	48.5	112	0.068	2000	3200	0.37
51310	50	95	31	96.5	202	0.21	1600	2400	0.92
51410	50	110	43	160	302	0.5	1300	1900	1.86
51111	55	78	16	33.8	89.2	0.043	2800	4000	0.22
51211	55	90	25	67.5	158	0.13	1900	3000	0.58
51311	55	105	35	115	242	0.31	1500	2200	1.28
51411	55	120	48	182	355	0.68	1100	1700	2.51
51112	60	85	17	40.2	108	0.063	2600	3800	0.27
51212	60	95	26	73.5	178	0.16	1800	2800	0.66
51312	60	110	35	118	262	0.35	1400	2000	1.37
51412	60	130	51	200	395	0.88	1000	1600	3.08
51113	65	90	18	40.5	112	0.07	2400	3600	0.31
51213	65	100	27	74.8	188	0.18	1700	2600	0.72
51313	65	115	36	115	262	0.38	1300	1900	1.48
51413	65	140	56	215	448	1.14	900	1400	3.91
51114	70	95	18	40.8	115	0.078	2200	3400	0.33
51214	70	105	27	73.5	188	0.19	1600	2400	0.75
51314	70	125	40	148	340	0.6	1200	1800	1.98
51414	70	150	60	255	560	1.71	850	1300	4.85
51115	75	100	19	48.2	140	0.11	2000	3200	0.38
51215	75	110	27	74.8	198	0.21	1500	2200	0.82
51315	75	135	44	162	380	0.77	1100	1700	2.58
51415	75	160	65	268	615	2	800	1200	6.08
51116	80	105	19	48.5	145	0.12	1900	3000	0.4
51216	80	115	28	83.8	222	0.27	1400	2000	0.9
51316	80	140	44	160	380	0.81	1000	1600	2.69
51416	80	170	68	292	692	2.55	750	1100	7.12
51117	85	110	19	49.2	150	0.13	1800	2800	0.42
51217	85	125	31	102	280	0.41	1300	1900	1.21
51317	85	150	49	208	495	1.28	950	1500	3.47
51417	85	180	72	318	782	3.24	700	1000	8.28
51118	90	120	22	65	200	0.21	1700	2600	0.65
51218	90	135	35	115	315	0.52	1200	1800	1.65
51318	90	155	50	205	495	1.34	900	1400	3.69
51418	90	190	77	325	825	3.71	670	950	9.86
51120	100	135	25	85	268	0.37	1600	2400	0.95
51220	100	150	38	132	375	0.75	1100	1700	2.21
51320	100	170	55	235	595	1.88	800	1200	4.86
51420	100	210	85	400	1080	6.17	600	850	13.3
51122	110	145	25	87	288	0.43	1500	2200	1.03
51222	110	160	38	138	412	0.89	1000	1600	2.39
51322	110	190	63	278	755	2.97	700	1100	7.05
51422	110	230	95	490	1390	10.4	530	750	20
51124	120	155	25	87	298	0.48	1400	2000	1.1
51224	120	170	39	135	412	0.96	950	1500	2.62
51324	120	210	70	330	945	4.58	670	950	9.54
51424	120	250	102	412	1220	12.4	480	670	25.5
51126	130	170	30	108	375	0.74	1300	1900	1.7
51226	130	190	45	188	575	1.75	900	1400	3.93
51326	130	225	75	358	1070	5.91	600	850	11.7
51426	130	270	110	630	2010	21.1	430	600	32
51128	140	180	31	110	402	0.84	1200	1800	1.85
51228	140	200	46	190	598	1.96	850	1300	4.27
51328	140	240	80	395	1230	7.84	560	800	14.1
51428	140	280	112	630	2010	22.2	400	560	32.2
51130	150	190	31	110	415	0.93	1100	1700	1.95
51230	150	215	50	242	768	3.06	800	1200	5.52
51330	150	250	80	405	1310	8.8	530	750	14.9
51430	150	300	120	670	2240	27.9	380	530	38.2
51132	160	200	31	110	428	1.01	1000	1600	2.06
51232	160	225	51	240	768	3.23	750	1100	5.91
51332	160	270	87	470	1570	12.8	500	700	18.9
51134	170	215	34	135	528	1.48	950	1500	2.71
51234	170	240	55	280	915	4.48	700	1000	7.31
51334	170	280	87	470	1580	13.8	480	670	22.5
51136	180	225	34	135	528	1.56	900	1400	2.77
51236	180	250	56	285	958	4.91	670	950	7.84
51336	180	300	95	518	1820	17.9	430	600	28.7
51138	190	240	37	172	678	2.41	850	1300	3.61
51238	190	270	62	328	1160	6.97	630	900	10.5
51338	190	320	105	600	2220	26.7	400	560	41.1
51140	200	250	37	172	698	2.6	800	1200	3.77
51240	200	280	62	332	1210	7.59	600	850	11
51340	200	340	110	608	2220	28	360	500	44
51144	220	270	37	188	782	3.35	750	1100	4.6
51244	220	300	63	365	1360	10.3	560	800	13.7
51148	240	300	45	258	1040	5.95	700	1000	7.6
51248	240	340	78	468	1870	19	450	630	23.6
51348	240	380	112	692	2870	44.1	320	450	51
51152	260	320	45	270	1140	6.99	670	950	8.1
51252	260	360	79	488	2050	22.3	430	600	25.5
51156	280	350	53	338	1430	11.2	560	800	12.2
51256	280	380	80	490	2140	24.7	400	560	27.8
51160	300	380	62	415.0	1860.0	18.5	500	700	17.5
51260	300	420	95	578.0	2670.0	39.3	360	560	42.5
51164	320	400	63	418.0	1920.0	20.2	480	670	18.9
51264	320	440	95	612.0	2920.0	45.3	340	480	45.5
51168	340	420	64	428.0	2050.0	22.7	450	630	20.5
51268	340	460	96	620.0	3040.0	49.6	320	450	52.0
51368	340	540	160	1120.0	5720.0	175.0	150	220	145.0
51172	360	440	65	432.0	2110.0	24.6	430	600	22.0
51272	360	500	110	775.0	3940.0	84.0	260	380	70.9
51176	380	460	65	440.0	2210.0	26.0	430	600	23.0
51276	380	520	112	788.0	4120.0	91.5	240	360	73.0
51180	400	480	65	452.0	2320.0	28.0	400	560	23.7
51280	400	540	112	802.0	4310.0	99.0	220	340	76.0
51184	420	500	65	462.0	2480.0	33.3	380	530	25.2
51188	440	540	80	527.0	3000.0	47.0	360	500	42.0
51288	440	600	130	808.0	4430.0	105.0	180	280	112.0
51192	460	560	80	578.0	3310.0	58.9	320	450	43.0
51292	460	620	130	892.0	5230.0	148.0	170	260	119.0
51196	480	580	80	592.0	3490.0	53.0	300	430	43.9
511/500	500	600	80	595.0	3570.0	68.8	280	400	47.2
512/500	500	670	135	1020.0	6200.0	212.0	150	220	140.0
511/530	530	640	85	708.0	4000.0	80.0	260	380	57.3
512/630	630	850	175	1320.0	9300.0	481.0	100	160	252.0
511/670	670	800	105	860.0	5020.0	206.0	160	240	105.0
511/750	750	900	120	768.0	5900.0	220.0	160	240	112.2

Double Direction Thrust Ball Bearing Size Chart

Bearing Model	Bore Diameter d (mm)	Outside Diameter D (mm)	Height T1 (mm)	Basic Dynamic Load Rating Ca (kN)	Basic Static Load Rating C0a (kN)	Minimum Load Factor A	Limiting Speed with Grease (r/min)	Limiting Speed with Oil (r/min)	Mass W (kg)
52202	15.	32.	22.	16.5	24.8	0.003	4800.	6700.	0.08
52204	20.	40.	26.	22.2	37.5	0.007	3800.	5300.	0.15
52205	25.	47.	28.	27.8	50.5	0.013	3400.	4800.	0.21
52305	25.	52.	34.	35.5	61.5	0.021	3000.	4300.	0.32
52405	25.	60.	45.	55.5	89.2	0.044	2200.	3400.	0.61
52206	30.	52.	29.	28.	54.2	0.016	3200.	4500.	0.24
52306	30.	60.	38.	42.8	78.5	0.033	2400.	3600.	0.47
52406	30.	70.	52.	72.5	125.	0.082	1900.	3000.	0.97
52207	35.	62.	34.	39.2	78.2	0.033	2800.	4000.	0.41
52307	35.	68.	44.	55.2	105.	0.059	2000.	3200.	0.68
52407	35.	80.	59.	86.8	155.	0.13	1700.	2600.	1.41
52208	40.	68.	36.	47.	98.2	0.05	2400.	3600.	0.53
52308	40.	78.	49.	69.2	135.	0.098	1900.	3000.	1.03
52408	40.	90.	65.	112.	205.	0.22	1500.	2200.	1.94
52209	45.	73.	37.	47.8	105.	0.059	2200.	3400.	0.59
52309	45.	85.	52.	75.8	150.	0.13	1700.	2600.	1.25
52409	45.	100.	72.	140.	262.	0.36	1400.	2000.	2.64
52210	50.	78.	39.	48.5	112.	0.068	2000.	3200.	0.69
52310	50.	95.	58.	96.5	202.	0.21	1600.	2400.	1.76
52410	50.	110.	78.	160.	302.	0.5	1300.	1900.	3.4
52211	55.	90.	45.	67.5	158.	0.13	1900.	3000.	1.17
52311	55.	105.	64.	115.	242.	0.31	1500.	2200.	2.38
52411	55.	120.	87.	182.	355.	0.68	1100.	1700.	4.54
52212	60.	95.	46.	73.5	178.	0.16	1800.	2800.	1.21
52312	60.	110.	64.	118.	262.	0.35	1400.	2000.	2.54
52412	60.	130.	93.	200.	395.	0.88	1000.	1600.	5.58
52413	65.	140.	101.	215.	448.	1.14	900.	1400.	7.07
52213	65.	100.	47.	74.8	188.	0.18	1700.	2600.	1.32
52313	65.	115.	65.	115.	262.	0.38	1300.	1900.	2.72
52214	70.	105.	47.	73.5	188.	0.19	1600.	2400.	1.42
52314	70.	125.	72.	148.	340.	0.6	1200.	1800.	3.64
52414	70.	150.	107.	255.	560.	1.71	850.	1300.	8.71
52215	75.	110.	47.	74.8	198.	0.21	1500.	2200.	1.5
52315	75.	135.	79.	162.	380.	0.77	1100.	1700.	4.72
52415	75.	160.	115.	268.	615.	2.	800.	1200.	10.7
52216	80.	115.	48.	83.8	222.	0.27	1400.	2000.	1.63
52316	80.	140.	79.	160.	380.	0.81	1000.	1600.	4.92
52217	85.	125.	55.	102.	280.	0.41	1300.	1900.	2.27
52317	85.	150.	87.	208.	495.	1.28	950.	1500.	6.26
52417	85.	180.	128.	318.	782.	3.24	700.	1000.	14.8
52218	90.	135.	62.	115.	315.	0.52	1200.	1800.	3.05
52318	90.	155.	88.	205.	495.	1.34	900.	1400.	6.56
52418	90.	190.	135.	325.	825.	3.71	670.	950.	17.3
52220	100.	150.	67.	132.	375.	0.75	1100.	1700.	4.03
52320	100.	170.	97.	235.	595.	1.88	800.	1200.	8.62
52420	100.	210.	150.	400.	1080.	6.17	600.	850.	23.5
52222	110.	160.	67.	138.	412.	0.89	1000.	1600.	4.38
52322	110.	190.	110.	278.	755.	2.97	700.	1100.	12.4
52422	110.	230.	166.	490.	1390.	10.4	530.	750.	33.
52224	120.	170.	68.	135.	412.	0.96	950.	1500.	4.82
52324	120.	210.	123.	330.	945.	4.58	670.	950.	17.1
52226	130.	190.	80.	188.	575.	1.75	900.	1400.	7.36
52326	130.	225.	130.	358.	1070.	5.91	600.	850.	20.8
52426	130.	270.	192.	630.	2010.	21.1	430.	600.	55.
52228	140.	200.	81.	190.	598.	1.96	850.	1300.	7.8
52328	140.	240.	140.	395.	1230.	7.84	560.	800.	25.
52428	140.	280.	196.	630.	2010.	22.2	400.	560.	61.2
52230	150.	215.	89.	242.	768.	3.06	800.	1200.	10.3
52330	150.	250.	140.	405.	1310.	8.8	530.	750.	26.4
52430	150.	300.	209.	670.	2240.	27.9	380.	530.	68.1
52232	160.	225.	90.	240.	768.	3.23	750.	1100.	10.9
52332	160.	270.	153.	470.	1570.	12.8	500.	700.	33.6
52234	170.	240.	97.	280.	915.	4.48	700.	1000.	13.4
52334	170.	280.	153.	470.	1580.	13.8	480.	670.	15.
52236	180.	250.	98.	285.	958.	4.91	670.	950.	14.6
52336	180.	300.	165.	518.	1820.	17.9	430.	600.	49.
52238	190.	270.	109.	328.	1160.	6.97	630.	900.	19.5
52240	200.	280.	109.	332.	1210.	7.59	500.	850.	20.4

Single Direction Thrust Ball Bearings with Sphered Housing Washer Size Chart

Bearing Number (53000 Series)	Bearing Number (53000 U Series)	Bore Diameter d (mm)	Outside Diameter D (mm)	Height T2 (mm)	Dynamic Axial Load Rating Ca (kN)	Static Axial Load Rating C0a (kN)	Minimum Load Factor A	Grease Limiting Speed (r/min)	Oil Limiting Speed (r/min)
53200	53200 U	10.	26.	11.6	12.5	17.	0.002	6000.	8000.
53201	53201 U	12.	28.	11.4	13.2	19.	0.002	5300.	7500.
53202	53202 U	15.	32.	13.3	16.5	24.8	0.003	4800.	6700.
53203	53203 U	17.	35.	13.2	17.	27.2	0.004	4500.	6300.
53204	53204 U	20.	40.	14.7	22.2	37.5	0.007	3800.	5300.
53205	53205 U	25.	47.	16.7	27.8	50.5	0.013	3400.	4800.
53305	53305 U	25.	52.	19.8	35.5	61.5	0.021	3000.	4300.
53405	53405 U	25.	60.	26.4	55.5	89.2	0.044	2200.	3400.
53206	53206 U	30.	52.	17.8	28.	54.2	0.016	3200.	4500.
53306	53306 U	30.	60.	22.6	42.8	78.5	0.033	2400.	3600.
53406	53406 U	30.	70.	30.1	72.5	125.	0.082	1900.	3000.
53207	53207 U	35.	62.	19.9	39.2	78.2	0.033	2800.	4000.
53307	53307 U	35.	68.	25.6	55.2	105.	0.059	2000.	3200.
53407	53407 U	35.	80.	34.	86.8	155.	0.13	1700.	2600.
53208	53208 U	40.	68.	20.3	47.	98.2	0.05	2400.	3600.
53308	53308 U	40.	78.	28.5	69.2	135.	0.096	1900.	3000.
53408	53408 U	40.	90.	38.2	112.	205.	0.22	1500.	2200.
53209	53209 U	45.	73.	21.3	47.8	105.	0.059	2200.	3400.
53309	53309 U	45.	85.	30.1	75.8	150.	0.13	1700.	2600.
53409	53409 U	45.	100.	42.4	140.	262.	0.36	1400.	2000.
53210	53210 U	50.	78.	23.5	48.5	112.	0.068	2000.	3200.
53310	53310 U	50.	95.	34.3	96.5	202.	0.21	1600.	2400.
53410	53410 U	50.	110.	45.6	160.	302.	0.5	1300.	1900.
53211	53211 U	55.	90.	27.3	67.5	158.	0.13	1900.	3000.
53311	53311 U	55.	105.	39.3	115.	242.	0.31	1500.	2200.
53411	53411 U	55.	120.	50.5	182.	355.	0.68	1100.	1700.
53212	53212 U	60.	95.	28.	73.5	178.	0.16	1800.	2800.
53312	53312 U	60.	110.	38.3	118.	262.	0.35	1400.	2000.
53412	53412 U	60.	130.	54.3	200.	395.	0.88	1000.	1600.
53213	53213 U	65.	100.	28.7	74.8	188.	0.18	1700.	2600.
53313	53313 U	65.	115.	39.4	115.	262.	0.38	1300.	1900.
53413	53413 U	65.	140.	60.2	215.	448.	1.14	900.	1400.
53214	53214 U	70.	105.	28.8	73.5	188.	0.19	1600.	2400.
53314	53314 U	70.	125.	44.2	148.	340.	0.6	1200.	1800.
53414	53414 U	70.	150.	63.3	255.	560.	1.71	850.	1300.
53215	53215 U	75.	110.	28.3	74.8	198.	0.21	1500.	2200.
53315	53315 U	75.	135.	48.1	162.	380.	0.77	1100.	1700.
53415	53415 U	75.	160.	69.	268.	615.	2.	800.	1200.
53216	53216 U	80.	115.	29.5	83.8	222.	0.27	1400.	2000.
53316	53316 U	80.	140.	47.6	160.	380.	0.81	1000.	1600.
53416	53416 U	80.	170.	72.2	292.	692.	2.55	750.	1100.
53217	53217 U	85.	125.	33.1	102.	280.	0.41	1300.	1900.
53317	53317 U	85.	150.	53.1	208.	495.	1.28	950.	1500.
53417	53417 U	85.	180.	77.	318.	782.	3.24	700.	1000.
53218	53218 U	90.	135.	38.5	115.	315.	0.52	1200.	1800.
53318	53318 U	90.	155.	54.6	205.	495.	1.34	900.	1400.
53418	53418 U	90.	190.	81.2	325.	825.	3.71	670.	950.
53220	53220 U	100.	150.	40.9	132.	375.	0.75	1100.	1700.
53320	53320 U	100.	170.	59.2	235.	595.	1.88	800.	1200.
53420	53420 U	100.	210.	90.	400.	1080.	6.17	600.	850.
53222	53222 U	110.	160.	40.2	138.	412.	0.89	1000.	1600.
53322	53322 U	110.	190.	67.2	278.	755.	2.97	700.	1100.
53422	53422 U	110.	230.	99.7	490.	1390.	10.4	530.	750.
53224	53224 U	120.	170.	40.8	135.	412.	0.96	950.	1500.
53324	53324 U	120.	210.	74.1	330.	945.	4.58	670.	950.
53424	53424 U	120.	250.	107.3	412.	1220.	12.4	480.	670.
53226	53226 U	130.	190.	47.9	188.	575.	1.75	900.	1400.
53326	53326 U	130.	225.	80.3	358.	1070.	5.91	600.	850.
53426	53426 U	130.	270.	115.2	630.	2010.	21.1	430.	600.
53228	53228 U	140.	200.	48.6	190.	598.	1.96	850.	1300.
53328	53328 U	140.	240.	84.9	395.	1230.	7.84	560.	800.
53428	53428 U	140.	280.	117.	630.	2010.	22.2	400.	560.
53230	53230 U	150.	215.	53.3	242.	768.	3.06	800.	1200.
53330	53330 U	150.	250.	83.7	405.	1310.	8.8	530.	750.
53430	53430 U	150.	300.	125.9	670.	2240.	27.9	380.	530.
53232	53232 U	160.	225.	54.7	240.	768.	3.23	750.	1100.
53332	53332 U	160.	270.	91.7	470.	1570.	12.8	500.	700.
53432	53432 U	160	320	135.3	–	–	–	–	–
53234	53234 U	170	240	58.7	280	915	4.48	700	1000
53334	53334 U	170	280	91.3	470	1580	13.8	480	670
53434	53434 U	170	340	141	–	–	–	–	–
53236	53236 U	180	250	58.2	285	958	4.91	670	950
53336	53336 U	180	300	99.3	518	1820	17.9	430	600
53436	53436 U	180	360	148.3	–	–	–	–	–
53238	53238 U	190	270	65.6	328	1160	6.97	630	900
53338	53338 U	190	320	111	608	2220	26.7	400	560
53240	53240 U	200	280	65.3	332	1210	7.59	600	850
53340	53340 U	200	340	118.4	600	2220	28	360	500
53244	53244 U	220	300	65.6	365	1360	10.3	560	800
53248	53248 U	240	340	81.7	468	1870	19	450	630
53252	53252 U	260	360	82.8	488	2050	22.3	430	600
53256	53256 U	280	380	85	490	2140	24.7	400	560
53260	53260 U	300	420	100.5	578	2670	39.3	360	560
53264	53264 U	320	440	100.5	612	2920	45.3	340	480
53268	53268 U	340	460	100.3	620	3040	49.6	320	450
53272	53272 U	360	500	116.7	775	3940	84	260	380

Double Direction Thrust Ball Bearings with Sphered Housing Washer Size Chart

Bearing Number – 54000 Series	Bearing Number – 54000 U Series	Bore Diameter d (mm)	Shaft Washer Bore Diameter d2 (mm)	Outside Diameter D (mm)	Total Height T4 (mm)	Basic Dynamic Axial Load Rating Ca (kN)	Basic Static Axial Load Rating C0a (kN)	Minimum Load Factor A	Limiting Speed with Grease Lubrication (r/min)	Limiting Speed with Oil Lubrication (r/min)
54202	54202 U	15	10	32	24.6	16.5	24.8	0.003	4800	6700
54204	54204 U	20	15	40	27.4	22.2	37.5	0.007	3800	5300
54205	54205 U	25	20	47	31.4	27.8	50.5	0.013	3400	4800
54305	54305 U	25	20	52	37.6	35.5	61.5	0.021	3000	4300
54405	54405 U	25	15	60	49.7	55.5	89.2	0.044	2200	3400
54206	54206 U	30	25	52	32.6	28	54.2	0.016	3200	4500
54306	54306 U	30	25	60	41.3	42.8	78.5	0.033	2400	3600
54406	54406 U	30	20	70	56.2	72.5	125	0.082	1900	3000
54207	54207 U	35	30	62	37.8	39.2	78.2	0.033	2800	4000
54307	54307 U	35	30	68	47.2	55.2	105	0.059	2000	3200
54407	54407 U	35	25	80	63.1	86.8	155	0.13	1700	2600
54208	54208 U	40	30	68	38.6	47	98.2	0.05	2400	3600
54308	54308 U	40	30	78	54.1	69.2	135	0.098	1900	3000
54408	54408 U	40	30	90	69.5	112	205	0.22	1500	2200
54209	54209 U	45	35	73	39.6	47.8	105	0.059	2200	3400
54309	54309 U	45	35	85	56.3	75.8	150	0.13	1700	2600
54409	54409 U	45	35	100	78.9	140	262	0.36	1400	2000
54210	54210 U	50	40	78	42	48.5	112	0.068	2000	3200
54310	54310 U	50	40	95	64.7	96.5	202	0.21	1600	2400
54410	54410 U	50	40	110	83.2	160	302	0.5	1300	1900
54211	54211 U	55	45	90	49.6	67.5	158	0.13	1900	3000
54311	54311 U	55	45	105	72.6	115	242	0.31	1500	2200
54411	54411 U	55	45	120	92	182	355	0.68	1100	1700
54212	54212 U	60	50	95	50	73.5	178	0.16	1800	2800
54312	54312 U	60	50	110	70.7	118	262	0.35	1400	2000
54412	54412 U	60	50	130	99	200	395	0.88	1000	1600
54213	54213 U	65	55	100	50.4	215	448	1.14	1700	2600
54313	54313 U	65	55	115	71.9	74.8	188	0.18	1300	1900
54413	54413 U	65	50	140	109.4	115	262	0.38	900	1400
54214	54214 U	70	55	105	50.6	73.5	188	0.19	1600	2400
54314	54314 U	70	55	125	80.3	148	340	0.6	1200	1800
54414	54414 U	70	55	150	114.1	255	560	1.71	850	1300
54215	54215 U	75	60	110	49.6	74.8	198	0.21	1500	2200
54315	54315 U	75	60	135	87.2	162	380	0.77	1100	1700
54415	54415 U	75	60	160	123	268	615	2	800	1200
54216	54216 U	80	65	115	51	83.8	222	0.27	1400	2000
54316	54316 U	80	65	140	86.1	160	380	0.81	1000	1600
54416	54416 U	80	65	170	128.5	—	—	—	—	—
54217	54217 U	85.	70.	125.	59.2	102.	280.	0.41	1300.	1900.
54317	54317 U	85.	70.	150.	95.2	208.	495.	1.28	950.	1500.
54417	54417 U	85.	65.	180.	138.	318.	782.	3.24	700.	1000.
54218	54218 U	90.	75.	135.	69.	115.	315.	0.52	1200.	1800.
54318	54318 U	90.	75.	155.	97.1	205.	495.	1.34	900.	1400.
54418	54418 U	90.	70.	190.	143.5	325.	825.	3.71	670.	950.
54220	54220 U	100.	85.	150.	72.8	132.	375.	0.75	1100.	1700.
54320	54320 U	100.	85.	170.	105.4	235.	595.	1.88	800.	1200.
54420	54420 U	100.	80.	210.	159.9	400.	1080.	6.17	600.	850.
54222	54222 U	110.	95.	160.	71.4	138.	412.	0.89	1000.	1600.
54322	54322 U	110.	95.	190.	118.4	278.	755.	2.97	700.	1100.
54224	54224 U	120.	100.	170.	71.6	135.	412.	0.96	950.	1500.
54324	54324 U	120.	100.	210.	131.2	330.	945.	4.58	670.	950.
54226	54226 U	130.	110.	190.	85.8	188.	575.	1.75	900.	1400.
54228	54228 U	140.	120.	200.	86.2	190.	598.	1.96	850.	1300.
54230	54230 U	150.	130.	215.	95.6	242.	768.	3.06	800.	1200.
54232	54232 U	160.	140.	225.	97.4	240.	768.	3.23	750.	1100.
54234	54234 U	170.	150.	240.	104.4	280.	915.	4.48	700.	1000.
54236	54236 U	180.	150.	250.	102.4	285.	958.	4.91	670.	950.
54238	54238 U	190.	160.	270.	116.4	328.	1160.	6.97	630.	900.
54240	54240 U	200.	170.	280.	115.6	332.	1210.	7.59	500.	850.
54244	54244 U	220.	190.	300.	115.2	–	–	–	–	–

Angular Contact Thrust Ball Bearing Size Chart

Bearing Model	Bore Diameter d (mm)	Outside Diameter D (mm)	Width T (mm)	Shoulder Diameter d1 Max (mm)	Housing Washer Width B (mm)	Seat Washer Width C (mm)	Chamfer Radius r Min (mm)	Chamfer Radius r1 Min (mm)	Dynamic Load Rating Ca (kN)	Static Load Rating C0a (kN)	Limiting Speed Grease (r/min)	Limiting Speed Oil (r/min)	Mass W (kg)
234405	25.	47.	28.	40.	7.	14.	0.6	0.15	10.19	24.1	7500.	10000.	0.186
234705	27.	47.	28.	40.	7.	14.	0.6	0.15	10.19	24.1	7500.	10000.	0.168
234406	30.	55.	32.	47.	8.	16.	1.	0.15	10.78	28.2	6700.	9000.	0.286
234706	32.	55.	32.	47.	8.	16.	1.	0.15	10.78	28.2	6700.	9000.	0.262
234407	35.	62.	34.	53.	8.5	17.	1.	0.15	15.19	42.1	6000.	8000.	0.375
234707	37.	62.	34.	53.	8.5	17.	1.	0.15	15.19	42.1	6000.	8000.	0.345
234408	40.	68.	36.	58.5	9.	18.	1.	0.15	18.3	49.9	5600.	7500.	0.457
234708	42.	68.	34.	53.	8.5	17.	1.	0.15	18.3	49.9	5600.	7500.	0.419
234409	45.	75.	38.	65.	9.5	19.	1.	0.15	20.	59.8	5300.	7000.	0.551
234709	47.	75.	38.	65.	9.5	19.	1.	0.15	20.	59.8	5300.	7000.	0.51
234410	50.	80.	38.	70.	9.5	19.	1.	0.15	20.5	64.6	5000.	6700.	0.624
234710	52.	80.	38.	70.	9.5	19.	1.	0.15	20.5	64.6	5000.	6700.	0.577
234411	55.	90.	44.	78.	11.	22.	1.1	0.3	28.6	85.7	4500.	6000.	0.949
234711	57.	90.	44.	78.	11.	22.	1.1	0.3	28.6	85.7	4500.	6000.	0.889
234413	65.	100.	44.	88.	11.	22.	1.1	0.3	29.8	97.5	4300.	5600.	1.08
234713	67.	100.	44.	88.	11.	22.	1.1	0.3	29.8	97.5	4300.	5600.	1.01
234414	70.	110.	48.	97.	12.	24.	1.1	0.3	36.2	122.5	3800.	5000.	1.51
234714	73.	110.	48.	97.	12.	24.	1.1	0.3	36.2	122.5	3800.	5000.	1.38
234415	75.	115.	48.	102.	12.	24.	1.1	0.3	37.7	131.3	3800.	5000.	1.59
234715	78.	115.	48.	102.	12.	24.	1.1	0.3	37.7	131.3	3800.	5000.	1.45
234416	80.	125.	54.	110.	13.5	27.	1.1	0.3	44.1	156.8	3400.	4500.	2.23
234716	83.	125.	54.	110.	13.5	27.	1.1	0.3	44.1	156.8	3400.	4500.	2.06
234417	85.	130.	54.	115.	13.5	27.	1.1	0.3	44.6	162.6	3200.	4300.	2.36
234717	88.	130.	54.	115.	13.5	27.	1.1	0.3	44.6	162.6	3200.	4300.	2.18
234418	90.	140.	60.	123.	15.	30.	1.5	0.3	51.9	190.	3000.	4000.	3.01
234718	93.	140.	60.	123.	15.	30.	1.5	0.3	51.9	190.	3000.	4000.	2.81
234419	95.	145.	60.	128.	15.	30.	1.5	0.3	52.4	196.9	2800.	3800.	3.13
234719	98.	145.	60.	128.	15.	30.	1.5	0.3	52.4	196.9	2800.	3800.	2.92
234420	100	150	60	133	15	30	1.5	0.3	52.9	203.8	2800	3800	3.19
234720	103	150	30	133	15	30	1.5	0.3	52.9	203.8	2800	3800	2.97
234421	105	160	66	142	16.5	33	2	0.6	60.2	236.1	2400	3400	4.53
234721	109	160	66	142	16.5	33	2	0.6	60.2	236.1	2400	3400	—
234422	110	170	72	150	18	36	2	0.6	73.5	279.3	2200	3200	5.32
234722	114	170	72	150	18	36	2	0.6	73.5	279.3	2200	3200	—
234424	120	180	72	160	18	36	2	0.6	75.4	298.9	2200	3200	5.54
234724	124	180	72	160	18	36	2	0.6	75.4	298.9	2200	3200	5.11
234426	130	200	84	177	21	42	2	0.6	106.8	406.7	1900	2800	10.1
234726	135	200	84	177	21	42	2	0.6	106.8	406.7	1900	2800	8.9
234428	140	210	84	187	21	42	2.1	0.6	110.7	436.7	1800	2600	9.16
234728	145	210	84	187	21	42	2.1	0.6	110.7	436.7	1800	2600	8.44
234430	150	225	90	200	22.5	45	2.1	0.6	112.7	465.5	1700	2400	11.1
234730	155	225	90	200	22.5	45	2.1	0.6	112.7	465.5	1700	2400	10.3
234432	160	240	96	212	24	48	2.1	0.6	132.3	543.9	1600	2200	13.6
234732	165	240	96	212	24	48	2.1	0.6	132.3	543.9	1600	2200	12.6
234434	170	260	108	230	27	54	2.1	0.6	—	—	—	—	17.7
234734	176	260	108	230	27	54	2.1	0.6	—	—	—	—	16.3
234436	180	280	120	248	30	60	2.1	0.6	—	—	—	—	23.4
234736	187	280	120	248	30	60	2.1	0.6	—	—	—	—	21.5
234438	190	290	120	258	30	60	2.1	0.6	181.3	788.9	1400	1900	25.7
234738	197	290	120	258	30	60	2.1	0.6	181.3	788.9	1400	1900	23.7
234440	200	310	132	274	33	66	2.1	0.6	208.7	916.3	1300	1700	33.6
234740	207	310	132	274	33	66	2.1	0.6	208.7	916.3	1300	1700	31.3
234444	220	340	144	304	36	72	3	1	—	—	—	—	—
234744	228	340	144	304	36	72	3	1	—	—	—	—	—
234448	240	360	144	322	36	72	3	1	—	—	—	—	—
234748	248	360	144	322	36	72	3	1	—	—	—	—	—
234452	260	400	164	354	41	82	3	1.5	—	—	—	—	—
234752	269	400	164	354	41	82	3	1.5	—	—	—	—	—
234456	280	420	164	374	41	82	3	1.5	—	—	—	—	—
234756	289	420	164	374	41	82	3	1.5	—	—	—	—	—
234460	300	460	190	406	47.5	95	3	1.5	—	—	—	—	—
234760	310	460	190	406	47.5	95	3	1.5	—	—	—	—	—
234464	320	480	190	426	47.5	95	3	1.5	—	—	—	—	—
234764	330	480	190	426	47.5	95	3	1.5	—	—	—	—	—
234468	340	520	212	459	53	106	3	1.5	—	—	—	—	—
234768	350	520	212	459	53	106	3	1.5	—	—	—	—	—
234472	360	540	212	479	53	106	3	1.5	—	—	—	—	—
234772	370	540	212	479	53	106	3	1.5	—	—	—	—	—
234476	380	560	212	499	53	106	3	1.5	—	—	—	—	—
234776	390	560	212	499	53	106	3	1.5	—	—	—	—	—
234480	400	600	236	532	59	118	3	1.5	—	—	—	—	—
234780	410	600	236	532	59	118	3	1.5	—	—	—	—	—

Spherical Roller Thrust Bearings Size Chart

Bearing Number	Bore Diameter d (mm)	Outside Diameter D (mm)	Height T (mm)	Basic Dynamic Load Rating Ca (kN)	Basic Static Load Rating C0a (kN)	Minimum Load Factor A	Limiting Speed with Oil Lubrication (r/min)	Installation Dimension da min (mm)	Installation Dimension Da max (mm)	Installation Dimension ra max (mm)
29412	60.	130.	42.	368.	950.	0.086	2400.	90.	107.	1.5
29413	65.	140.	45.	390.	1110.	0.118	2200.	100.	115.	2.
29414	70.	150.	48.	438.	1260.	0.155	2000.	105.	124.	2.
29415	75.	160.	51.	490.	1430.	0.21	1900.	115.	132.	2.
29416	80.	170.	54.	555.	1600.	0.263	1800.	120.	141.	2.1
29317	85.	150.	39.	335.	1070.	0.105	2200.	115.	129.	1.5
29417	85.	180.	58.	600.	1750.	0.304	1700.	130.	150.	2.1
29318	90.	155.	39.	345.	1120.	0.116	2200.	118.	135.	1.5
29418	90.	190.	60.	665.	1980.	0.392	1600.	135.	158.	2.1
29320	100.	170.	42.	412.	1370.	0.166	2000.	132.	148.	1.5
29420	100.	210.	67.	808.	2430.	0.588	1400.	150.	175.	2.5
29322	110.	190.	48.	520.	1750.	0.279	1800.	145.	165.	2.
29422	110.	230.	73.	945.	2910.	0.724	1300.	165.	192.	3.
29324	120.	210.	54.	648.	2160.	0.44	1600.	160.	182.	2.1
29424	120.	250.	78.	1100.	3370.	0.933	1200.	180.	210.	3.
29326	130.	225.	58.	708.	2400.	0.543	1500.	170.	195.	2.1
29426	130.	270.	85.	1270.	3930.	1.64	1100.	195.	227.	3.
29328	140.	240.	60.	790.	2720.	0.71	1400.	185.	208.	2.1
29428	140.	280.	85.	1310.	4200.	1.796	1000.	205.	237.	3.
29330	150.	250.	60.	812.	2870.	0.774	1300.	195.	220.	2.1
29430	150.	300.	90.	1480.	4730.	2.285	950.	220.	253.	3.
29332	160.	270.	67.	965.	3390.	1.063	1200.	210.	236.	2.5
29432	160.	320.	95.	1620.	5380.	2.969	900.	230.	271.	4.
29334	170.	280.	67.	988.	3550.	1.16	1100.	220.	247.	2.5
29434	170.	340.	103.	1880.	6220.	4.015	850.	245.	288.	4.
29336	180.	300.	73.	1140.	4170.	1.628	1000.	235.	263.	2.5
29436	180.	360.	109.	2080.	6920.	4.936	750.	260.	305.	4.
29338	190.	320.	78.	1320.	4910.	2.294	900.	250.	281.	3.
29438	190.	380.	115.	2310.	7760.	6.228	700.	275.	322.	4.
29240	200.	280.	48.	660.	2720.	0.759	1400.	235.	258.	2.
29340	200.	340.	85.	1490.	5420.	2.827	900.	265.	298.	3.
29440	200.	400.	122.	2540.	8550.	7.588	700.	290.	338.	4.
29244	220.	300.	48.	672.	2880.	0.749	1300.	260.	277.	2.
29344	220.	360.	85.	1560.	5780.	3.21	850.	285.	316.	3.
29444	220.	420.	122.	2640.	9140.	8.583	670.	310.	360.	5.
29248	240.	340.	60.	945.	4090.	1.483	1100.	285.	311.	2.1
29348	240.	380.	85.	1610.	6130.	3.569	800.	300.	337.	3.
29448	240.	440.	122.	2740.	9750.	9.656	630.	330.	381.	5.
29252	260.	360.	60.	990.	4450.	1.754	1000.	305.	331.	2.1
29352	260.	420.	95.	2000.	7960.	6.073	750.	330.	372.	4.
29452	260.	480.	132.	3260.	11800.	14.45	530.	360.	419.	5.
29256	280.	380.	60.	1000.	4600.	1.855	950.	325.	351.	2.1
29356	280.	440.	95.	2070.	8410.	6.782	670.	350.	394.	4.
29456	280.	520.	145.	3850.	14100.	20.73	530.	390.	446.	5.
29260	300.	420.	73.	1380.	6210.	3.43	900.	355.	386.	2.5
29360	300.	480.	109.	2530.	10200.	10.2	630.	380.	429.	4.
29460	300.	540.	145.	3980.	14900.	22.95	480.	410.	471.	5.
29264	320.	440.	73.	1420.	6590.	3.822	800.	375.	406.	2.5
29364	320.	500.	109.	2610.	10700.	11.15	600.	400.	449.	4.
29464	320.	580.	155.	4610.	17600.	31.97	450.	435.	507.	6.
29268	340.	460.	73.	1470.	6980.	4.27	800.	395.	427.	2.5
29368	340.	540.	122.	3100.	12700.	15.64	530.	430.	484.	4.
29468	340.	620.	170.	5060.	19200.	38.98	430.	465.	541.	6.
29272	360.	500.	85.	1850.	8700.	6.797	700.	420.	461.	3.
29372	360.	560.	122.	3180.	13300.	16.33	500.	450.	504.	4.
29472	360.	640.	170.	5310.	20400.	43.24	400.	485.	560.	6.
29276	380.	520.	85.	1900.	9170.	7.536	670.	440.	480.	3.
29376	380.	600.	132.	3720.	15900.	24.68	450.	480.	538.	5.
29476	380.	670.	175.	5810.	23100.	55.3	380.	510.	587.	6.
29280	400.	540.	85.	1930.	9430.	8.989	670.	460.	500.	3.
29380	400.	620.	132.	3720.	15900.	24.52	450.	500.	557.	5.
29480	400.	710.	185.	6420.	25800.	67.59	360.	540.	622.	6.
29284	420.	580.	95.	2390.	11700.	12.6	600.	490.	534.	4.
29384	420.	650.	140.	4160.	17700.	30.7	430.	525.	585.	5.
29484	420.	730.	185.	6530.	26200.	70.27	340.	560.	643.	6.
29288	440.	600.	95.	2460.	12400.	13.89	560.	510.	554.	4.
29388	440.	680.	145.	4460.	19200.	36.	400.	548.	614.	5.
29488	440.	780.	206.	7470.	29400.	89.34	320.	595.	684.	8.
29292	460.	620.	95.	2530.	13000.	15.32	530.	530.	575.	4.
29392	460	710	150	4850	21300	44.6	360	575	638	5
29492	460	800	206	7730	31100	99.15	300	615	704	8
29296	480	650	103	2760	13900	17.66	500	555	603	4
29396	480	730	150	4960	22200	48.02	340	593	660	5
29496	480	850	224	8950	35700	132.4	280	645	744	8
292/500	500	670	103	2790	14200	18.48	480	575	622	4
293/500	500	750	150	4930	22300	48.09	340	615	683	5
294/500	500	870	224	9260	39700	146.9	260	670	765	8
292/530	530	750	109	3140	16200	24.2	430	611	661	4
293/530	530	800	160	5790	26300	68.1	320	650	724	6
294/530	530	920	236	10100	41600	179.2	240	700	810	8
292/560	560	710	115	3470	18100	30.09	430	645	697	4
293/560	560	850	175	6480	29700	86.9	300	691	770	6
294/560	560	980	250	11400	47800	238	220	750	860	10
292/600	600	800	122	3830	20100	37.04	400	690	744	4
293/600	600	900	180	7110	32600	102.9	280	735	815	6
294/600	600	1030	258	12200	53000	290	200	800	900	10
292/630	630	850	132	4510	23900	52.95	360	730	786	5
293/630	630	950	190	7920	37000	122.2	260	780	857	8
294/630	630	1090	280	13800	58000	343	180	845	956	10
292/670	670	900	140	4970	26500	65.18	340	780	830	5
293/670	670	1000	200	8650	40300	158.4	240	825	905	8
294/670	670	1150	290	14900	62900	405	170	900	1010	12
292/710	710	950	145	5420	29400	80.47	300	825	880	5
293/710	710	1060	212	9600	45100	199.2	220	875	960	8
294/710	710	1220	308	16800	73800	554.7	160	950	1070	12
292/750	750	1000	150	5800	31900	94.72	280	870	928	5
293/750	750	1120	224	10500	50600	250.5	200	925	1010	8
294/750	750	1280	315	18000	79800	650.6	150	1000	1125	12
292/800	800	1060	155	6290	35300	116.2	260	925	985	6
293/800	800	1180	230	11300	54900	295.8	190	985	1065	8
294/800	800	1360	335	20200	90000	831.6	140	1070	1195	12
292/850	850	1120	160	6810	38900	140.9	240	980	1035	6
293/850	850	1250	243	12500	61400	371.3	180	1040	1130	10
294/850	850	1440	354	22200	99800	1026	130	1130	1265	12
292/900	900	1180	170	7380	42000	165.4	220	1035	1095	6
293/900	900	1320	250	13800	69200	471	170	1110	1195	10

Cylindrical roller Thrust Bearing Size Chart

Bearing Number	Bore Diameter d (mm)	Outside Diameter D (mm)	Height H (mm)	Dynamic Load Rating Ca (kN)	Static Load Rating C0a (kN)	Minimum Load Factor A	Limiting Speed Grease (r/min)	Limiting Speed Oil (r/min)	Mass W (kg)
81108	40	60	13	37.2	115.	0.002	1700	2400	0.12
81208	40	68	19	68.2	190.	0.004	1200	1800	0.27
81210	50	78	22	77.	235.	0.005	1000	1600	0.45
81111	55	78	16	56.5	215.	0.005	1400	2000	0.24
81211	55	90	25	104.	318.	0.009	950	1500	0.71
81113	65	90	18	65.8	235.	0.006	1200	1800	0.381
81213	65	100	27	112.	362.	0.012	850	1300	0.874
81215	75	110	27	125.	430.	0.017	750	1100	0.98
81117	85	110	19	75.	302.	0.008	900	1400	0.45
81217	85	125	31	152.	550.	0.026	670	950	1.44
81118	90	120	22	105.	408.	0.015	850	1300	0.67
81220	100	150	38	228.	840.	0.059	560	850	2.58
81124	120	155	25	155.	660.	0.036	700	1000	1.36
81226	130	190	45	368.	1420.	0.164	450	700	4.59

Tapered Roller Thrust Bearings Size Chart

Bearing Number	Bore Diameter d (mm)	Outside Diameter D (mm)	Height H (mm)	Basic Dynamic Load Rating Ca (kN)	Basic Static Load Rating C0a (kN)	Minimum Load Factor A	Limiting Speed Grease (r/min)	Limiting Speed Oil (r/min)	Mass W (kg)
99426	130.	270.	85.	1040.	3780.	0.638	380.	500.	28.5
99428	140.	280.	85.	1120.	4150.	0.736	360.	480.
99434	170.	340.	103.	1520.	5750.	1.38	280.	380.	58.
99436	180.	360.	109.	1630.	5980.	1.58	240.	340.	55.8
99440	200.	400.	122.	1840.	7210.	2.256	200.	300.	75.
99448	240.	440.	122.	2320.	9480.	3.826	180.	260.
99452	260.	480.	132.	2730.	11400.	5.5	160.	220.
99456	280.	520.	145.	3150.	13400.	7.56	140.	190.
99464	320.	580.	155.	4000.	17200.	12.6	110.	160.
99476	380.	670.	175.	5040.	22900.	22.2	85.	120.	254.

Needle Roller Thrust Bearing Size Chart

Component Model	Component Bore Diameter dc (mm)	Component Outside Diameter Dc (mm)	Needle Roller Diameter Dw (mm)	Basic Dynamic Axial Load Rating Ca (kN)	Basic Static Axial Load Rating C0a (kN)	Limiting Speed with Grease (r/min)	Limiting Speed with Oil (r/min)	Component Mass W (kg)
AXK 1730	17	30	2	7.28	29.50	3200	4300	0.004
AXK 2035	20	35	2	9.00	38.00	2800	3800	0.005
AXK 2542	25	42	2	13.00	48.20	2200	3200	0.007
AXK 3047	30	47	2	15.80	74.00	2000	3000	0.008
AXK 3552	35	52	2	16.00	80.20	1900	2800	0.010
AXK 4060	40	60	3	25.00	110.00	1700	2400	0.016
AXK 4565	45	65	3	26.00	122.00	1600	2200	0.018
AXK 5070	50	70	3	27.50	135.00	1600	2200	0.020
AXK 5578	55	78	3	30.20	162.00	1400	1900	0.028
AXK 6085	60	85	3	35.50	228.00	1300	1800	0.033
AXK 6590	65	90	3	36.00	242.00	1200	1700	0.035

Also Read: What is a Thrust Washer? The Complete Guide

Ending Note

With this thrust bearing size chart, you can quickly find the bearing model number or bearing dimensions you need. However, please note that this chart is only for reference. Before purchasing, you should confirm the exact bearing size, structure, load requirement, and application with the manufacturer.

If you need to buy thrust bearings, you can contact BKZ Industry. As a bearing manufacturer, BKZ Industry can supply many thrust bearing types and sizes for different industrial applications.

Written by

Ryan Wang

Editor-in-Chief

Ryan Wang is an R&D Engineer at BKZ Industry with nearly a decade of hands-on experience in bearing engineering. With deep expertise in bearing design, selection, and application, he has supported a wide range of industrial projects across multiple sectors. Recognizing that many customers and engineers lack a clear understanding of bearing technologies, Ryan actively shares his practical knowledge to help users choose reliable, efficient bearing solutions and improve equipment performance.

Share this post on:

What Are Bearing Seals? How Do They Work, and What Are Their Types?

Learn what bearing seals are, how they work, how they differ from bearing shields, their contact types and materials, common…

Ryan Wang

22nd Jul,2026

What Are Dry Bearings? How Do They Work?

Learn what dry bearings are, how they work, and their materials, structures, advantages, limitations, and industrial applications in aerospace, construction,…

Ryan Wang

21st Jul,2026

Pillow Block vs Plummer Block: Are They The Same?

Learn the difference between pillow block and plummer block, including their housing designs, bearing types, applications, mounting methods, load capacities,…

Ryan Wang

20th Jul,2026

Plummer Block Bearing Size Chart: Dimensions and Models

Explore this plummer block bearing size chart covering SN, SNK, and SD housings. Compare shaft diameters, mounting dimensions, compatible self-aligning…

Ryan Wang

17th Jul,2026

Products

Industries

Resources

About Us

Contact Us

Hot-selling Bearings

Special Bearings

Application-based Bearings

Related Products

Industries

Resources

Hot-selling Bearings

Special Bearings

Application-based Bearings

Related Products

Thrust Bearing Size Chart in mm

Table of Contents

Single Direction Thrust Ball Bearing Size Chart

Double Direction Thrust Ball Bearing Size Chart

Single Direction Thrust Ball Bearings with Sphered Housing Washer Size Chart

Double Direction Thrust Ball Bearings with Sphered Housing Washer Size Chart

Angular Contact Thrust Ball Bearing Size Chart

Spherical Roller Thrust Bearings Size Chart

Cylindrical roller Thrust Bearing Size Chart

Tapered Roller Thrust Bearings Size Chart

Needle Roller Thrust Bearing Size Chart

Ending Note

Thrust Bearing Size Chart in mm

Table of Contents

Single Direction Thrust Ball Bearing Size Chart

Double Direction Thrust Ball Bearing Size Chart

Single Direction Thrust Ball Bearings with Sphered Housing Washer Size Chart

Double Direction Thrust Ball Bearings with Sphered Housing Washer Size Chart

Angular Contact Thrust Ball Bearing Size Chart

Spherical Roller Thrust Bearings Size Chart

Cylindrical roller Thrust Bearing Size Chart

Tapered Roller Thrust Bearings Size Chart

Needle Roller Thrust Bearing Size Chart

Ending Note

Get Quotation Now